Heritage Portland StoneĀ®

Heritage Portland StoneĀ®

Click to zoom

Above is the range panel located at our factory on Portland which shows the typical geological characteristics of Heritage Portland Stone®

Heritage Portland Stone® includes the geological characteristic of our Whitbed seam which ties in with historical use on all Portland buidings typically pre 1970's.

Shell Content

Heritage Portland Stone® has some areas of low shell content and some areas of high shell content.

Shell Distribution

The shells are randomly distributed across the stone.

Texture

Varied texture is evident across the slab. Tight, uniform areas are adjacent to areas of openness and concentrated inclusions.

Colour

Typical Portland colour - creamy/white mellowing to grey/white over time.

Other Available Beds of Portland Stone

Ashlar cladding Yes
Masonry inc. copings, lintels & cills Yes
Load bearing Masonry inc. columns Yes
Plinths Yes All porous limestones will draw in moisture that could contain stains from surrounding media so it advisable to ensure that paving is laid to a fall away from the stones.
External paving inc. thresholds, swimming pool surrounds & steps Yes All porous limestones will draw in moisture that could contain stains from surrounding media so it advisable to ensure that paving is laid to a fall away from the stones.
Swimming pool cladding at and below the waterline No We would advise against the use of any limestone inside the actual pool.
Internal flooring and walls linings inc. stairs Yes
Internal worktops, inc. vanity and kitchen No There are products that can be used to protect the stone.
Wet room areas inc. shower trays and saunas No In most circumstances, although there are sealers that can protect the stone.
Fireplaces Yes
Carving and sculpture Yes Finer details might be lost in the shell structure.
Headstones No

Get a sample

Samples sent in the post are indicative of the typical colour and surface texture of the stone.  They are unable to show all the natural variations in visual appearance, colour, texture and geological features that are present in all natural stones.  To fully understand the geology of our Portland Stone, we would recommend a visit to view the large range panels approximately 3m x 2m at our factory site on Portland.  Once your selection is made we will be delighted to send you a sample of your desired stone.

Standard Portland stone samples are 150mm x 150mm at 20mm thick

ā˜Ž 01737 771 772

āœ‰ enquiries@albionstone.com

Stone required

Thank you

Albion Stone, a fourth generation family business pride ourselves on having a helpful and skilled workforce as well as modern and traditional manufacturing process to enable us to produce the highest quality Portland Stone with minimal environmental impact.