Jordans Basebed

Jordans Basebed

Above is the range panel located at our factory on Portland which shows the typical geological characteristics of Jordans Basebed

Shell Content

Contains small grey shell fragments.  As we mine towards the Bowers site, we are starting to see more shells in the current mine production, but it remains the cleanest Portland Stone currently being produced.

Shell Distribution

The shell fragments are normally evenly distributed across the stone, but there are concentrations of shells in some stones that give a mottled appearance as it dries out following manufacture.

Texture

Very tight texture making it ideal for fine carvings & mouldings as well as detailed masonry & cladding

Colour

Typical Portland colour, creamy/white.

Ashlar cladding Yes
Masonry inc. copings, lintels & cills Yes
Load bearing Masonry inc. columns Yes
Plinths No All porous limestones will draw in moisture that could contain stains from surrounding media so it advisable to ensure that paving is laid to a fall away from the stones.
External paving inc. thresholds, swimming pool surrounds & steps No We are aware that Basebed has been used extensively in London for thresholds without any problems, but salt crystallisation could cause accelerated weathering in some situations.
Swimming pool cladding at and below the waterline No We would advise against the use of any limestone inside the actual pool.
Internal flooring and walls linings inc. stairs Yes
Internal worktops, inc. vanity and kitchen No There are products that can be used to protect the stone.
Wet room areas inc. shower trays and saunas No In most circumstances, although there are sealers that can protect the stone.
Fireplaces Yes
Carving and sculpture Yes Finer details might be lost in the shell structure.
Headstones Yes

Some Examples

Jordans Basebed is the premium quality, fine grain Portland stone. Perfect for ashlar walls, flooring and intricate stonework, it was used on the award winning Ashmolean Museum.

Get a sample

Samples sent in the post are indicative of the typical colour and surface texture of the stone.  They are unable to show all the natural variations in visual appearance, colour, texture and geological features that are present in all natural stones.  To fully understand the goeolgy of our Portland Stone, we would recommend a visit to view the large range panels approximately 3m x 2m at our factory site on Portland.  Once your selection is made we will be delighted to send you a sample of your desired stone.

Standard Portland stone samples are 150mm x 150mm at 20mm thick

 01737 771 772

 enquiries@albionstone.com

Stone required

Thank you

Albion Stone, a fourth generation family business pride ourselves on having a helpful and skilled workforce as well as modern and traditional manufacturing process to enable us to produce the highest quality Portland Stone with minimal environmental impact.